This is an old revision of the document!
Hackaday PCB Design Guidelines write-up
Perform you submit a PCB for manufacturing please perform ERC (electrical rule check) and DRC (design rule check). As the standard rules in EAGLE are not precise please use these files for DRC: Ätzwerk files for EAGLE design rule check
Available sizes for punching vias in the university: 0.6 mm (drill 0.9 mm, pad 1.5 mm) and 1.0 mm (drill 1.5 mm, pad 2.5 mm). Große Nieten (Innendurchmesser = 1 mm):
Passendes Via: Bohrung (= Bohrlochdurchmesser): 1,5 mm Durchmesser (= Außendurchmesser): 2,5 mm
Kleine Nieten (Innendurchmesser = 0,6 mm):
Passendes Via: Bohrung (= Bohrlochdurchmesser): 0,9 mm Durchmesser (= Außendurchmesser): 1,5 mm
Through-Hole Components need to be routed to at the bottom layer.
Trust in autorouter
Wrong track size
Use of discontinued or unavailable components
No prototyping/simulation