Sidebar
ee:pcbdesign
Table of Contents
This is an old revision of the document!
PCB design guidelines
Hackaday PCB Design Guidelines write-up
Perform you submit a PCB for manufacturing please perform ERC (electrical rule check) and DRC (design rule check). As the standard rules in EAGLE are not precise please use these files for DRC: Ätzwerk files for EAGLE design rule check
Available sizes for punching vias in the university: 0.6 mm (drill 0.9 mm, pad 1.5 mm) and 1.0 mm (drill 1.5 mm, pad 2.5 mm).
Common mistakes
Trust in autorouter
Wrong track size
Use of discontinued or unavailable components
No prototyping/simulation
ee/pcbdesign.1615207157.txt.gz · Last modified: 2021/03/08 13:39 by 127.0.0.1
