Inputs:

The inputs are set as default in the following manner:

1. Focusrite 18i20 inputs 1 to 8, routed inside the isolated recording booth through the I/O Box input section, with same labeling.
2. Rode NT1 Mic connected to I/O Box Input 1.
3. XLR cable connected to I/O Box Input 2, for a second microphone if needed.
4. BSS Audio AR-133 Active DI Box No.1 connected to I/O Box Input 5.
5. BSS Audio AR-133 Active DI Box No.2 connected to I/O Box Input 6.

The Inputs cannot be controlled by the Focusrite Control panel, this has to be done in the DAW (i.e. Cubase)

Outputs:

The outputs are set as default in the following manner:

1. Focusrite 18i20 1+2 monitor outputs (back panel) connected to the Yamaha HS5 speakers, left and right respectively.
2. Focusrite 18i20 outputs 3 to 10, routed inside the isolated recording booth through the I/O Box output section, connected, with same labeling.
3. I/O Box outputs 1+2 connected to ART HeadAmp 6 Pro to XLR main inputs, left and right respectively.