This is an old revision of the document!
The inputs are set as default in the following manner:
* Focusrite Scarlet 18i20 inputs 1 to 8, routed inside the isolated recording booth through the I/O Box input section, with same labeling. * Rode NT1 Mic connected to I/O Box Input 1. * XLR cable connected to I/O Box Input 2, for a second microphone if needed. * BSS Audio AR-133 Active DI Box No.1 connected to I/O Box Input 5. * BSS Audio AR-133 Active DI Box No.2 connected to I/O Box Input 6. * Two more BSS Audio AR-133 Active DI Boxes can be used (on storage), connect to I/O Box Input 7 and 8 if needed.
The Inputs cannot be controlled by the Focusrite Control panel, this has to be done in the DAW (i.e. Cubase)
The outputs are set as default in the following manner:
* Focusrite Scarlet 18i20 1+2 monitor outputs (back panel) connected to the Yamaha HS5 speakers, left and right respectively. * Focusrite Scarlet 18i20 outputs 3 to 10, routed inside the isolated recording booth through the I/O Box output section, connected, with same labeling. * I/O Box outputs 1+2 connected to ART HeadAmp 6 Pro to XLR main inputs, left and right respectively.