ee:pcbdesign
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
ee:pcbdesign [2021/03/08 13:39] 127.0.0.1 external edit |
ee:pcbdesign [2023/11/28 12:30] (current) FKR@staff.hsrw |
||
|---|---|---|---|
| Line 5: | Line 5: | ||
| [[https://www.aetzwerk.de/eagle|Ätzwerk files for EAGLE design rule check]] | [[https://www.aetzwerk.de/eagle|Ätzwerk files for EAGLE design rule check]] | ||
| + | ==== Design considerations for self-etched PCBs at the university ==== | ||
| + | The biggest PCB blanks we stock at the university are 160 mm by 100 mm. Your designs should not be bigger than that. | ||
| Available sizes for punching vias in the university: 0.6 mm (drill 0.9 mm, pad 1.5 mm) and 1.0 mm (drill 1.5 mm, pad 2.5 mm). | Available sizes for punching vias in the university: 0.6 mm (drill 0.9 mm, pad 1.5 mm) and 1.0 mm (drill 1.5 mm, pad 2.5 mm). | ||
| + | Große Nieten (Innendurchmesser = 1 mm): | ||
| + | |||
| + | Passendes Via: | ||
| + | Bohrung (= Bohrlochdurchmesser): 1,5 mm | ||
| + | Durchmesser (= Außendurchmesser): 2,5 mm | ||
| + | |||
| + | |||
| + | Kleine Nieten (Innendurchmesser = 0,6 mm): | ||
| + | |||
| + | Passendes Via: | ||
| + | Bohrung (= Bohrlochdurchmesser): 0,9 mm | ||
| + | Durchmesser (= Außendurchmesser): 1,5 mm | ||
| + | |||
| + | |||
| + | Through-hole (THT) components need to be routed to at the bottom layer. | ||
| ===== Common mistakes ===== | ===== Common mistakes ===== | ||
ee/pcbdesign.1615207157.txt.gz · Last modified: 2021/03/08 13:39 by 127.0.0.1
Page Tools
