ee:pcbdesign
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
ee:pcbdesign [2023/11/28 12:30] FKR@staff.hsrw |
ee:pcbdesign [2023/11/28 12:30] (current) FKR@staff.hsrw |
||
|---|---|---|---|
| Line 7: | Line 7: | ||
| ==== Design considerations for self-etched PCBs at the university ==== | ==== Design considerations for self-etched PCBs at the university ==== | ||
| - | The biggest PCB blansk we stock at the university are usually 160 mm by 100 mm. Your designs should not be bigger than that. | + | The biggest PCB blanks we stock at the university are 160 mm by 100 mm. Your designs should not be bigger than that. |
| Available sizes for punching vias in the university: 0.6 mm (drill 0.9 mm, pad 1.5 mm) and 1.0 mm (drill 1.5 mm, pad 2.5 mm). | Available sizes for punching vias in the university: 0.6 mm (drill 0.9 mm, pad 1.5 mm) and 1.0 mm (drill 1.5 mm, pad 2.5 mm). | ||
ee/pcbdesign.txt ยท Last modified: 2023/11/28 12:30 by FKR@staff.hsrw
Page Tools
