This shows you the differences between two versions of the page.
Next revision | Previous revision | ||
ee:focusrite_18i20_audio_interface_inputs_outputs_configuration [2020/03/05 15:53] 19923@students.hsrw created |
ee:focusrite_18i20_audio_interface_inputs_outputs_configuration [2021/03/08 13:39] (current) |
||
---|---|---|---|
Line 3: | Line 3: | ||
The outputs are set as default in the following manner: | The outputs are set as default in the following manner: | ||
- | - Focusrite Monitor Outputs 1+2 connected to Yamaha HS5 speakers, left and right respectively. | + | - Focusrite 18i20 Monitor Outputs 1+2 (back panel) connected to the Yamaha HS5 speakers, left and right respectively. |
- | - Focusrite Outputs 3 – 10 connected to I/O Box inside the recording booth, connected to the output XLR sockets, with same labeling. | + | - Focusrite Outputs 3 to 10 connected to I/O Box inside the recording booth, connected to the output XLR sockets, with same labeling. |
- I/O Box Output 1+2 connected to ART HeadAmp 6 Pro to XLR main inputs, left and right respectively. | - I/O Box Output 1+2 connected to ART HeadAmp 6 Pro to XLR main inputs, left and right respectively. | ||
+ | |||
+ | |||
+ | The inputs are set as default in the following manner: | ||
+ | |||
+ | - I/O Box Inputs connected to Focusrite Inputs 1 – 8, with same labeling. | ||
+ | - The Inputs cannot be controlled by the Focusrite Control panel, this has to be done in the DAW (i.e. Cubase) |