ee:studio_default_inputs_outputs_configuration
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
|
ee:studio_default_inputs_outputs_configuration [2020/03/05 16:18] 19923@students.hsrw created |
ee:studio_default_inputs_outputs_configuration [2021/03/08 13:39] (current) |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== Audio Interface Inputs/Outputs Configuration: ====== | + | ===== Studio Default Inputs/Outputs Configuration ===== |
| - | The outputs are set as default in the following manner: | + | ==== Inputs ==== |
| - | - Focusrite 18i20 Monitor Outputs 1+2 (back panel) connected to the Yamaha HS5 speakers, left and right respectively. | + | The inputs are set as default in the following manner: |
| - | - Focusrite Outputs 3 to 10 connected to I/O Box inside the recording booth, connected to the output XLR sockets, with same labeling. | + | |
| - | - I/O Box Output 1+2 connected to ART HeadAmp 6 Pro to XLR main inputs, left and right respectively. | + | |
| + | * [[focusrite_18i20|Focusrite Scarlet 18i20]] inputs 1 to 8, routed inside the isolated recording booth through the I/O Box input section, with same labeling. | ||
| + | * [[Rode NT1]] Mic connected to [[I/O Box]] Input 1. | ||
| + | * XLR cable connected to [[I/O Box]] Input 2, for a second microphone if needed. | ||
| + | * [[BSS Audio AR-133 Active DI Box]] No.1 connected to I/O Box Input 5. | ||
| + | * [[BSS Audio AR-133 Active DI Box]] No.2 connected to I/O Box Input 6. | ||
| + | * Two more BSS Audio AR-133 Active DI Boxes can be used (on storage), connect to [[I/O Box]] Input 7 and 8 if needed. | ||
| - | The inputs are set as default in the following manner: | + | The Inputs cannot be controlled by the Focusrite Control panel, this has to be done in the DAW (i.e. Cubase) |
| + | |||
| + | |||
| + | ==== Outputs ==== | ||
| + | |||
| + | The outputs are set as default in the following manner: | ||
| - | - I/O Box Inputs connected to Focusrite Inputs 1 – 8, with same labeling. | + | * [[focusrite_18i20|Focusrite Scarlet 18i20]] 1+2 monitor outputs (back panel) connected to the [[Yamaha HS5]] speakers, left and right respectively. |
| - | - The Inputs cannot be controlled by the Focusrite Control panel, this has to be done in the DAW (i.e. Cubase) | + | * [[focusrite_18i20|Focusrite Scarlet 18i20]] outputs 3 to 10, routed inside the isolated recording booth through the [[I/O Box]] output section, connected, with same labeling. |
| + | * I/O Box outputs 1+2 connected to [[ART HeadAmp 6 Pro]] to XLR main inputs, left and right respectively. | ||
ee/studio_default_inputs_outputs_configuration.1583421492.txt.gz · Last modified: 2021/03/08 13:39 (external edit)
Page Tools
