This shows you the differences between two versions of the page.
ee:studio_default_inputs_outputs_configuration [2020/03/05 16:29] 19923@students.hsrw |
ee:studio_default_inputs_outputs_configuration [2021/03/08 13:39] |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | ====== Studio Default Inputs/Outputs Configuration ====== | ||
- | The inputs are set as default in the following manner: | ||
- | |||
- | - Focusrite 18i20 inputs 1 to 8, routed inside the isolated recording booth through the I/O Box input section, with same labeling. | ||
- | - Rode NT1 Mic connected to I/O Box Input 1. | ||
- | - XLR cable connected to I/O Box Input 2, for a second microphone if needed. | ||
- | - BSS Audio AR-133 Active DI Box No.1 connected to I/O Box Input 5. | ||
- | - BSS Audio AR-133 Active DI Box No.2 connected to I/O Box Input 6. | ||
- | |||
- | The Inputs cannot be controlled by the Focusrite Control panel, this has to be done in the DAW (i.e. Cubase) | ||
- | |||
- | The outputs are set as default in the following manner: | ||
- | |||
- | - Focusrite 18i20 1+2 monitor outputs (back panel) connected to the Yamaha HS5 speakers, left and right respectively. | ||
- | - Focusrite 18i20 outputs 3 to 10, routed inside the isolated recording booth through the I/O Box output section, connected, with same labeling. | ||
- | - I/O Box outputs 1+2 connected to ART HeadAmp 6 Pro to XLR main inputs, left and right respectively. |