This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
ee:rode_nt1 [2020/03/06 15:19] 19923@students.hsrw |
ee:rode_nt1 [2021/03/08 13:39] (current) |
||
---|---|---|---|
Line 1: | Line 1: | ||
===== RØDE NT1 Condenser Microphone ===== | ===== RØDE NT1 Condenser Microphone ===== | ||
- | ==== Specs ==== | + | {{ http://www.rode.com/microphones/nt1 | Official Link }} |
+ | |||
+ | |||
+ | ==== Specs: ==== | ||
• Large Diaphragm Cardioid Condenser Microphone. | • Large Diaphragm Cardioid Condenser Microphone. | ||
- | • Gold-plated 1" capsule which employs patented Lyre technology from Rycote | ||
- | • Black metal housing with scratch-resistant ceramic coating | ||
- | • Extremely low self-noise (4.5 dBA) | ||
- | • Incl. Special SMR shock mount SMR with detachable stainless steel pop shield and dust bag | ||
- | • Made in Australia | ||
- | • 10-Year warranty for registered users (special warranty between producer and purchaser) | ||
- | • Directional characteristic: Cardioid | ||
- | • Frequency range: 20-20000 Hz | ||
- | • Output impedance: 100 Ohm | ||
- | • Sensitivity: 35.0 mV/Pa | ||
- | • Equivalent noise level: 4.5 dBA (according to IEC651), Max | ||
- | • Output level: +8.0 DBu (1 kHz, 1% THD, 1 kOhm load) | ||
- | • Dynamic range: 128 dB | ||
- | • Peak SPL: 132 dB | ||
- | • Signal to noise ratio: 90 dBA (according to IEC651) | ||
- | • Requires phantom power 24 V / 48 V | ||
- | • Port: 3-pin XLR | ||
- | • Dimensions (diameter x length): 50 x 190 mm | ||
- | • Weight: 395 g | ||
- | ==== Links ==== | + | • Gold-plated 1" capsule which employs patented Lyre technology from Rycote. |
- | http://www.rode.com/microphones/nt1 | + | • Black metal housing with scratch-resistant ceramic coating. |
+ | |||
+ | • Extremely low self-noise (4.5 dBA). | ||
+ | |||
+ | • Incl. Special SMR shock mount SMR with detachable stainless steel pop shield and dust bag. | ||
+ | |||
+ | • 10-Year warranty for registered users (special warranty between producer and purchaser). | ||
+ | |||
+ | • Directional characteristic: Cardioid. | ||
+ | |||
+ | • Frequency range: 20-20000 Hz. | ||
+ | |||
+ | • Output impedance: 100 Ohm. | ||
+ | |||
+ | • Sensitivity: 35.0 mV/Pa. | ||
+ | |||
+ | • Equivalent noise level: 4.5 dBA (according to IEC651), Max. | ||
+ | |||
+ | • Output level: +8.0 DBu (1 kHz, 1% THD, 1 kOhm load). | ||
+ | |||
+ | • Dynamic range: 128 dB. | ||
+ | |||
+ | • Peak SPL: 132 dB. | ||
+ | |||
+ | • Signal to noise ratio: 90 dBA (according to IEC651). | ||
+ | |||
+ | • Requires phantom power 24 V / 48 V. | ||
+ | |||
+ | • Port: 3-pin XLR. | ||
+ | |||
+ | • Dimensions (diameter x length): 50 x 190 mm. | ||
+ | |||
+ | • Weight: 395 g. | ||
+ | |||
+ | • Made in Australia. | ||
+ | |||
+ | |||
+ | {{ ee:audio:rode_nt1.jpg?direct }} | ||
+ | {{ ee:audio:rode_nt1_2.jpg?direct }} | ||
+ | {{ ee:audio:rode_nt1_3.jpg?direct }} | ||
+ | |||
+ | |||
+ | ==== More Links: ==== | ||
https://www.thomann.de/gb/rode_nt1_kit.htm | https://www.thomann.de/gb/rode_nt1_kit.htm | ||
+ | |||
+ | |||
+ | [[ee:hardware_available| Back to Hardware Available]] | ||
+ | |||
+ | [[ee:audiolab| Back to Audio Lab Main Menu]] | ||
+ |