Optimal distance to light source is 1,05m
Chuck (black mesuring device) is to bealigned centered, pro tip: mark the position
Software to control chuck temperature (not yet installed) from Oven Industrial COntrols
Turn on vaccum by turnign all three levers
copper plate can be cleaned from oxidization by steel wool
fill factor is the area under the MPP in realtion to the maximum possible defined by Isc and Voc. 80-82% is good. Bad FF can be because of bad contacts.
Light intensity changes Isc.
Temperature influences Voc (2 mV/K)
Gap filler could be used for glass covered solar cells (mini module)
Two profiles as templates (Std. cell & Mini Module)
AM0 is the outer space spectrum
SunsVOC Intesity sweep, how good could the cell be?
cameras are from Basler
contact pins from company Ingun