Differences

This shows you the differences between two versions of the page.

--- ee:rode_nt1 [2020/03/10 15:58]
19923@students.hsrw
+++ ee:rode_nt1 [2021/03/08 13:39]
@@ Line 1: / Line 1: @@
-===== RØDE NT1 Condenser Microphone =====
-{{ http://www.rode.com/microphones/nt1 | Official Link }}
-==== Specs ====
-• Large Diaphragm Cardioid Condenser Microphone.
-• Gold-plated 1" capsule which employs patented Lyre technology from Rycote.
-• Black metal housing with scratch-resistant ceramic coating.
-• Extremely low self-noise (4.5 dBA).
-• Incl. Special SMR shock mount SMR with detachable stainless steel pop shield and dust bag.
-• 10-Year warranty for registered users (special warranty between producer and purchaser).
-• Directional characteristic: Cardioid.
-• Frequency range: 20-20000 Hz.
-• Output impedance: 100 Ohm.
-• Sensitivity: 35.0 mV/Pa.
-• Equivalent noise level: 4.5 dBA (according to IEC651), Max.
-• Output level: +8.0 DBu (1 kHz, 1% THD, 1 kOhm load).
-• Dynamic range: 128 dB.
-• Peak SPL: 132 dB.
-• Signal to noise ratio: 90 dBA (according to IEC651).
-• Requires phantom power 24 V / 48 V.
-• Port: 3-pin XLR.
-• Dimensions (diameter x length): 50 x 190 mm.
-• Weight: 395 g.
-• Made in Australia.
-{{ ee:audio:rode_nt1.jpg?direct }}
-{{ ee:audio:rode_nt1_2.jpg?direct }}
-{{ ee:audio:rode_nt1_3.jpg?direct }}
-==== More Links: ====
-https://www.thomann.de/gb/rode_nt1_kit.htm
-[[ee:hardware_available| Back to Hardware Available]]
-[[ee:audiolab| Back to Audio Lab Main Menu]]