Differences

This shows you the differences between two versions of the page.

--- ee:pcbdesign [2019/01/07 10:23]
FKR@staff.hsrw
+++ ee:pcbdesign [2021/10/08 09:35]
FKR@staff.hsrw
@@ Line 1: / Line 1: @@
+====== PCB design guidelines ======
+[[https://hackaday.io/project/6936-pcb-design-guidelines|Hackaday PCB Design Guidelines write-up]]
+Perform you submit a PCB for manufacturing please perform ERC (electrical rule check) and DRC (design rule check). As the standard rules in EAGLE are not precise please use these files for DRC:
 [[https://www.aetzwerk.de/eagle|Ätzwerk files for EAGLE design rule check]]
-[[https://hackaday.io/project/6936-pcb-design-guidelines|Hackaday PCB Design Guidelines write-up]]
+==== Design considerations for self-etched PCBs at the university ====
 Available sizes for punching vias in the university: 0.6 mm (drill 0.9 mm, pad 1.5 mm) and 1.0 mm (drill 1.5 mm, pad 2.5 mm).
+Große Nieten (Innendurchmesser = 1 mm):
+Passendes Via:
+Bohrung (= Bohrlochdurchmesser): 1,5 mm
+Durchmesser (= Außendurchmesser): 2,5 mm
+Kleine Nieten (Innendurchmesser = 0,6 mm):
+Passendes Via:
+Bohrung (= Bohrlochdurchmesser): 0,9 mm
+Durchmesser (= Außendurchmesser): 1,5 mm
+Through-Hole Components need to be routed to at the bottom layer.
+===== Common mistakes =====
+Trust in autorouter
+Wrong track size
+Use of discontinued or unavailable components
+No prototyping/simulation
-http://www.octamex.de/shop/download/Verarbeitungsanleitung_fuer_Dynamask.pdf