Differences

This shows you the differences between two versions of the page.

--- ee:pcbdesign [2019/01/03 22:06]
FKR@staff.hsrw created
+++ ee:pcbdesign [2019/01/07 10:26]
FKR@staff.hsrw
@@ Line 1: / Line 1: @@
+[[https://hackaday.io/project/6936-pcb-design-guidelines|Hackaday PCB Design Guidelines write-up]]
+Perform you submit a PCB for manufacturing please perform ERC (electrical rule check) and DRC (design rule check). As the standard rules in EAGLE are not precise please use these files for DRC:
 [[https://www.aetzwerk.de/eagle|Ätzwerk files for EAGLE design rule check]]
-[[https://hackaday.io/project/6936-pcb-design-guidelines|Hackaday PCB Design Guidelines write-up]]
+Available sizes for punching vias in the university: 0.6 mm (drill 0.9 mm, pad 1.5 mm) and 1.0 mm (drill 1.5 mm, pad 2.5 mm).